Assemble three colour coded fibre glass poles and separate according to size i.e. 2x large poles and 1x small pole.

Unroll inner tent, peg the four corners tightly ensure there are no creases in the groundsheet.

Feed the two largest colour coded poles through their sleeves, see Figure 2.

Insert the “key pieces” attached to the key rings, see Figure 1, to the ferrules at one end of the large pole, push the opposite end of the pole through the sleeve and insert the end into the corresponding key piece.

Unroll flysheet and identify front and rear of the tent.

Carefully throw the flysheet over the inner tent and attach all ties.

Feed the remaining colour coded pole (porch pole) through its corresponding sleeve.

Peg from corners, ensuring the flysheet is not touching the inner tent (to prevent leaking)

Peg remaining points around the tent and peg front door (ensure zips are closed).

Lay out fitted ground sheet and peg through the eyelets provided.